Cross HDPE Butt Fusion Fitting PE100 HDPE Pipe Fittings Lightweight

Basic Information

Product Name:Butt Fusion Cross Pipe Fittings

Material:PE100

Diameter:DN50-DN630

Pressure:0.6Mpa, 0.8Mpa, 1.0Mpa, 1.25Mpa, 1.6Mpa

Standard:EN 12201-3-2003, EN 1555-3-2002

Conntection:Butt Fusion Welding

Shape:Elbow, Tee, Union, Cross, Reducing 

Spigot short pipe connection with sealing ring

The socket short pipe connection method with sealing ring is suitable for pipe connection from φ32 to 160mm. Its performance characteristics: non-rigid connection, detachable, stretch-resistant.
Tip style spool fittings with seals are usually used for assembly between simple prefabricated fittings and can be installed horizontally or vertically. This flexible and small-sized connection method has certain advantages when the installation space is limited. The connector also comes with a yellow protective cap to keep out debris during the assembly phase. When installing, it should also be noted that the ends of the fittings should be chamfered, and the surface should be lubricated with soft (potassium) soap, silicone or petroleum jelly. Do not lubricate with mineral oil or grease as this may damage the rubber seals. Also, the socket is not used as an expander, so the fitting must be inserted all the way into the socket.

Product Specification

Product Pictures

Warehouse Display