|
Product Details:
|
| Product Name: | In Stock Butt Fusion Hdpe Pipe Fitting Pe Tee For Water Supply | Material: | PE100 |
|---|---|---|---|
| Diameter: | DN50-DN630 | Pressure: | 0.6Mpa, 0.8Mpa, 1.0Mpa, 1.25Mpa, 1.6Mpa |
| Standard: | EN 12201-3-2003, EN 1555-3-2002 | Conntection: | Butt Fusion Welding |
| Shape: | Elbow, Tee, Union, Cross, Reducing | ||
| High Light: | Tee HDPE Pipe Fittings,Water Supply hdpe butt fusion fittings,butt fusion fittings EN 12201-3 |
||
| Product Details |
|
Product Description |
Product Name:Butt fusion hdpe pipe fitting pe tee for water supply
Brand Name:SENPU
Material: PE100
Diameter:DN50-DN630
Pressure:0.6Mpa, 0.8Mpa, 1.0Mpa, 1.25Mpa, 1.6Mpa
Standard:EN 12201-3-2003, EN 1555-3-2002
Conntection:Butt Fusion Welding
Shape:Elbow, Tee, Union, Cross, Reducing
HDPE Butt Fusion Equal Tee. Size from 63mm-630mm. Use for water and gas supply.
| Connection Method |
|
line |
DN outside diameter |
Connection method |
|
1 |
63mm(below) |
hot melt socket |
|
2 |
63mm—110mm |
hot melt socket and butt fusion |
|
3 |
110mm(above) |
butt fusion |
Operation Procedure
Hot melt socket insertion mode (mainly used for small-caliber thin-wall pipe)
1. Cut the pipe so that the end face is perpendicular to the axis; Wipe the dirt on the surface of the pipe and connector and mark the insertion length.
2. Use a rotary scraper to scrape off the oxide layer on the surface of the pipe
3. After heating to the specified time, quickly connect the pipe and fittings without rotation, and do not move them within 15 seconds for natural cooling.
4. Set the heating temperature of the hot melt machine, insert the pipes and fittings vertically into the hot melt machine mold without rotation for heating.
|
Product Specification |
|
Our Company |
|
Projects |
|
Shipment |
| Product Details |
Contact Person: admin
Tel: +8613909020919
