Pipe Fitting PPR Ball Valves

INSTALLATION and OPERATING INSTRUCTION

1- Make sure there is no damage on the product may occur during transport and shipping. Before assembly do not unpack the product in order to prevent from the external effects. 

2- Clean all kinds of contaminants before assembly. 

3- Make sure that the thread length to be connected to the valve is not too short or too long than the thread length of the valve. 

4- Keep the valve in closed position during installation. Install the valve with the appropriate tool from the side where you’ll mount it. 

5- Use enough flax or plumping adhesive. 

6- Use the valve full open or full closed 

7- While opening and closing the valve, follow the arrows on the handle. 

8- Do not paint the valve, do not expose the valve with abrasive chemicals. 

9- Do not open or close with any other tool and do not remove the handle.